Driveway and Patio Services in Coventry

Resin, block paving, tarmac, concrete, cobbles and patios. Every surface from one company, with guide prices up front.

We are DNA Driveways Coventry, the driveway and paving side of DNA Landscapes. Because we lay every type of surface, we can tell you honestly which one suits your drive, your budget and the way you use it, rather than steering you towards the one thing we sell.

Charcoal block paving driveway laid by DNA Driveways across the frontage of a bungalow, seen from the corner of the road
Google reviews ★★★★★ 5.0 on Google
Established Part of DNA Landscapes since 2015
Accreditation Tobermore registered contractor
Guide prices From £120 per m²

Our services

Choose a surface

Every surface below is priced per square metre, supplied and laid, so you can compare before anyone visits. Each one has its own page with more detail.

Resin bound driveways

A smooth, seamless finish in a wide choice of aggregate colours. Laid on a porous base, water drains straight through it.

From £300 per m²

Block paving

Hard-wearing, easy to repair a block at a time, and endlessly flexible on colour, size and pattern.

From £180 per m²

Tarmac driveways

One of the quickest and most affordable drives to lay. Resurfacing is an option when the base underneath is sound.

From £180 per m², £120 to resurface

Imprinted concrete

A decorative concrete finish stamped to look like stone, brick or slate, then sealed so it needs little looking after.

From £250 per m²

Concrete driveways

The toughest, plainest option, built for heavy use such as caravan standings, work vans and long runs where looks matter less.

From £120 per m²

Cobbled and sett driveways

A traditional look in granite or concrete setts, well suited to older houses and longer drives.

Priced at survey

Patios and garden paving

Patios, paths and steps in natural stone or porcelain, with drainage planned where the paving meets the house.

Priced at survey

Driveway cleaning and sealing

A deep clean can show whether an old drive is worth keeping, and sealing afterwards keeps it looking that way.

Priced at survey

Side by side

How the main driveway surfaces compare

Surface Guide price per m² Typical lifespan Upkeep Drains through?
Resin bound £300 15–25+ years Low: sweep and wash Yes, on a porous base
Block paving £180 20–25+ years Medium: weeds and re-sanding joints Permeable blocks available
Tarmac £180 (£120 resurface) 15–20 years Medium: sealing and crack repair No, laid to drain
Imprinted concrete £250 15–25 years Medium: reseal every few years No, laid to drain
Plain concrete £120 30–40+ years Low: clean, sealing optional No, laid to drain

Lifespans are typical figures for a drive laid on a proper base and looked after. The real figure depends on the ground, the traffic it takes and how it is maintained. For a typical 50m² drive, those rates range from about £6,000 for plain concrete to about £15,000 for resin bound, plus any extra groundwork, drainage or dropped kerb.

How it works

How a driveway job runs

  1. Survey We measure up, check for underground services, and look at the soil, the levels and where the water will go.
  2. Dig out The old surface comes up and we excavate to the depth the new drive needs.
  3. Sub-base Crushed stone is laid and compacted in layers to carry the weight of vehicles.
  4. Edging Fixed edging goes in to hold the surface in place along every side.
  5. Surface and finish The surface is laid, then jointed, sealed and cleaned down as it needs.

Most driveways take one to two weeks from start to finish, weather permitting. The groundwork is the part you never see once the job is done, and it is the part that decides whether the drive still looks right in ten years.

Before you start

Drainage, planning and dropped kerbs

Run-off from front gardens

If you pave over 5m² of a front garden and the water flows into the road, you need planning permission. Choose a surface that lets water through, or have it fall to a lawn, border or soakaway, and you don’t. We include the drainage in our price.

Dropped kerbs in Coventry

Apply to Coventry City Council. A standard crossing is 2.7 metres wide, and planning permission is always needed for access onto a classified road.

Dropped kerbs in Warwickshire

Outside the city, in places like Kenilworth, Rugby and Binley Woods, the highway authority is Warwickshire County Council, and the kerb is lowered by an accredited contractor once it gives permission.

Recent work

A recent job: driveway, side path and patio

Bradstone Rumbled block paving to the front, a block-paved path down the side and a Kandala Grey sandstone patio behind, all on one bungalow in Binley Woods.

  • Charcoal mixed-size block paving driveway running to a light grey kerb edge beside a timber fence
    Block paving driveway in Binley Woods
  • Block-paved side path leading to a timber gate, with a gully taking the downpipe
    Block-paved side path in Binley Woods
  • Kandala Grey sandstone patio laid across the back of a brick bungalow up to a timber fence
    Sandstone patio in Binley Woods

See more of our work in the gallery

Not sure which surface suits your drive? Tell us how you use it and we will talk you through the options and prices.

Questions

Driveway questions we are often asked

Which driveway surface is best?

There isn't one answer. Resin bound gives the smoothest, lowest-maintenance finish but costs most. Block paving is the most flexible and easiest to repair. Tarmac and plain concrete are the most affordable. We look at your budget, what you park on the drive and how it drains before recommending one.

What is the cheapest new driveway?

Of our guide rates, plain concrete is lowest at £120 per m², followed by block paving and new tarmac at £180. If an existing tarmac drive has a sound base, resurfacing it from £120 per m² is often the best value of all.

Is resin bound the same as resin bonded?

No. Resin bound mixes the stones into the resin before it is trowelled flat, which gives a smooth, permeable surface. Resin bonded scatters loose stone onto a coat of resin, so it is not permeable and the loose stones can come away. We lay resin bound.

Do new driveways have to be permeable?

Not always. Planning permission is only needed if more than 5m² of front garden is paved with a surface that sheds water into the road. A surface that lets water through, or a solid one that drains into a border or soakaway, keeps you clear of that rule.

How long does a new driveway take?

Most driveways take one to two weeks from digging out to finishing, depending on the size, the surface and the weather.

Do I need permission for a dropped kerb?

Yes. In Coventry you apply to Coventry City Council, and planning permission is always needed for access onto a classified road. In the Warwickshire towns we cover, such as Kenilworth, Rugby and Binley Woods, you apply to Warwickshire County Council.

Areas we cover

Where we work

Our driveway and patio work takes us all over Coventry and these nearby towns:

  • Coventry
  • Earlsdon
  • Coundon
  • Binley Woods
  • Kenilworth
  • Balsall Common
  • Leamington Spa
  • Warwick
  • Solihull
  • Lapworth
  • Rugby
  • Dunchurch
  • Cawston
  • Long Lawford
  • Ryton-on-Dunsmore
  • Southam
  • Long Itchington
  • Nuneaton
  • Bedworth
  • Bulkington
  • Galley Common
  • Atherstone
  • Coleshill
  • Hinckley
  • Burbage

Get a driveway quote

Ring 0247 542 6111 and we’ll book a visit, look at the drive you have now and price up the surfaces that would work for it.